The LuNAR PIR Ceiling Detector is a digital ceiling mount detector with a slim housing, designed with state-of-the-art components to ensure reliable operation in a wide range of applications.The LuNAR PIR employs a dual element PIR sensor with digital true temperature compensation, while a..
* High quality imaging with 2 MP, 1920 × 1080 resolution.* 24/7 color imaging with F1.0 aperture.* 3D DNR technology delivers clean and sharp images.* 2.8 mm, 3.6 mm, 6 mm fixed focal lens.* Up to 20 m white light distance for bright night imaging.* One port for four switchable signals (TVI/AHD/CVI/..
* The parameters and datasheets below can only be applied to the 1500-S2 series.* In order to use the 5MP 16:9 HDCVI camera, the firmware of XVR must be upgraded to V4.001.0000001.0.R.200908 or later version.* Max 25 fps@5MP (16:9 video output)* CVI/CVBS/AHD/TVI switchable.* 3.6 mm fi..
* 5MP HDCVI IR Bullet Camera.* Max 25 fps@5MP (16:9 video output)* CVI/CVBS/AHD/TVI switchable.* 3.6 mm fixed lens (6 mm, 8 mm optional)* Max. IR length 80 m, Smart IR.* IP67, DC12V...
* Signals normal, alarm and open-circuit alarm zone conditions.* Small size.* Capable of supplying 13 mA to power non-addressable devices.* DC 24 V operation.* DIP switch address setting.* 126 usable detector address settings per loop...
PFS3008-8GT-L8-Port Desktop Gigabit Ethernet Switch> Compact design: Miniature size and light weight make it easy to deploy> Plug and play: No configuration required> Green technology: Adopts high quality environmentally friendly plastics> 7×24H: Stable performance for lon..
* The parameters and datasheets below can only be applied to the 1200-S5 series:* Max 30fps@1080P.* HD and SD output switchable.* 3.6mm fixed lens (2.8mm optional)* Built-in mic.* Max. IR length 30m, Smart IR.* IP67, DC12V...
* The parameters and datasheets below can only be applied to A51-S2 series* Max. 25 fps@5MP (16:9 video output)* CVI/CVBS/AHD/TVI switchable.* 3.6 mm fixed lens (2.8 mm optional)* Max. IR length 20 m, Smart IR.* IP67, DC12V...
The photoelectric smoke detector manufactured by TELEFIRE is equipped with a unique and sensitive sensor designed to detect smoke from various combustion sources...
TELEFIRE is an addressable detector allowing two modes of operation – fire alarm at a fixed temperature and an alarm set off by the rate of temperature rise. The TFH-280A detector from TELEFIRE is a smart set-point detector with an independent address, allowing coverage of a detection radius based o..
Telefire's TIP-224 is an analog addressable device that integrates an indoor horn and an addressable output card, eliminating the need for an output module installed in a separate box, therefore reducing material and labor cost. As an added benefit, the unit contains a high-brightness LED. The TIP-2..
The motion detector monitors the room and triggers an alarm if there is movement. The detector has an integrated infrared sensor.Should the motion detector detect movement, the sensor will immediately send an alarm signal to the base and an alarm/burglar alarm will go off. In the event of an al..
- Intelligent signal analysis technology. - Sensitivity is adjustable. - LED adjust ON/OFF. - Alarm delay is optional. - Anti RF interference (20V/m -1GHz) - Adopt Microcomputer unit control. - Alarm output N.C or N.O...
- Emergency button detector, once the emergency incident occurs, the detector will be triggered to transmit the signal to the alarm system. This product is suitable for all the places where the security protection is needed, such as residential areas, companies, shopping malls, hospitals, banks, gua..
* The parameters and datasheets below can only be applied to the 1200-S5 series.* Max 30fps@1080P.* HD and SD output switchable.* 3.6mm fixed lens (2.8mm, 6mm optional)* Max. IR length 40m, Smart IR.* IP67, DC12V...
Wireless Magnetic Detector W 03Reported signs of life in real timeOne million ways to prevent blockage codesBack to the wall tamperWireless alarm portABS white plastic packaging..
* Experience 1080P full HD video and the simplicity of using existing cabling
infrastructure with HDCVI. The 1080P starlight HDCVI camera presents
a high quality image with rich details even under extreme low-light
conditions. Also, the Lite series features compact design and friendly price.
Thi..
* 1/2.8" CMOS sensor* Resolution: 1080p, sensitivity: 0.005 Lux/F1.6, IR illumination up to 30 m, built-in microphone.* Lens focal length: 2.8 mm.* Automatic video gain control.* White balance adjustment: automatic/manual.* BLC - backlight compensation mode.* HLC - suppression of bright point light ..
· Advanced algorithms provide analogue detection discrimination.· Surface-mount device (SMD) circuit board design.· High immunity against unwanted alarms.· Stable smoke sensing chamber. No adjustment or replacement required.· 4-wire models for DC 12 V, 24 V and 48 V&nbs..
· Advanced algorithms provide excellent detection discrimination.· Durable sensor. No adjustment or replacement required.· Surface-mount device (SMD) circuit board design for stable and reliable operation.· Dual LEDs for 360° visibility.· 2-wire models for DC 12 V ..
* Experience 1080P full HD video and the simplicity of using existing
cabling infrastructure with HDCVI. The Lite series 1080P HDCVI camera
features a compact design and offers a high-quality image at a friendly
price. It offers various motorized/fixed lens models with a multi-language
OSD and H..
* The parameters and datasheets below can only be
applied to 1200-S4 series.* Max 30fps@1080P.* HD and SD output switchable.* 3.6mm fixed lens (2.8mm optional)* Max. IR length 30m, Smart IR.* IP67, IK10, DC12V...
High quality siren and long-life continuous rated12VDC130mA Siren Current110mA Strobe CurrentHigh quality UK stabilized caseWeatherproofFront and back tampers..
* This detector can be used in all areas where photoelectric smoke detector is required. It is suited for fires ranging from smoldering to flaming fires.* This detector uses a state of-the-art optical sensing chamber, it is designed to provide open area protection and to be used with most convention..
* This detector can be used in all
areas where heat detector is required. It is suited for fires ranging from heat
to flaming fires.* This detector is designed to provide
open area protection and to be used with most conventional fire alarm panel.* Two LEDs on each detector provide local 36..
* Pressure activated displacement element provides a safe user experience.* Integral alarm indicator available.* Resettable with simple key operation.* Suitable for indoor use.* Wide operating voltage range.* Compatible with 2-wire and 4-wire fire detection and alarm&nb..