Fire Systems

Taktis UL 2-8 Loop Hochiki protocol UL/FM® Approved

* Two full SLC circuit on board up to 126 detector.* Access level 2 enable key-switch.* 3 programmable inputs and 5 programmable. * Relay outputs.* 7 inch, full-color resistive touch screen. * 4 programmable NACs; Class B or 2 Class A with. * Internal synchronization.* 24V-5.25A power..

Kentec TAKTIS 4 Loop Apollo Protocol Kitemark ,BSI®Licensed

* Two addressable loop up to 126 detectors per loop.* Access level 2 enables key-switch.* 7 "full-color touch screen.* 400 milliamp output.* 4 programmable siren outputs.* 3 programmable inputs.* Up to 512 programmable inputs/outputs.* 5 relay outputs: fault, fire, alarm, programmable 1 and.* progra..

SAVER-7000/2N ADRESSABLE

SAVER-7000/2N25.7.2019Management of up to 254 devices SAVER-7000 from TELEFIRE is an advanced analog addressable fire detection and extinguishing control panel developed modularly using advanced technologies, allowing operational flexibility and easy installation. The system complies with the curren..

Kentec Elite RS 2 Loop Analogue Addressable Fire Control Panel- Hochiki protocol - Red ,UL/FM® Approved

* Two full SLC circuit up to 126 detector each.* Access level 2 enable key-switch.* Can be networked with additional RS and/ or Elite control panels.* Compatible with eMatrix graphics annunciator.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-5.25A power supp..

Kentec Syncro AS 2 Loop Apollo Protocol Kitemark ,BSI® Licensed

* Two addressable loops up to 126 detectors each.* Access level 2 WITH C/W enable key-switch.* Networkable (requires K555 network card)* 400 milliamp output.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-3A power supply.* Stores 500 last events in the event l..

SAVER-7000/1N ADRESSABLE

SAVER-7000/1N25.7.2019Management of up to 128 devices SAVER-7000 from TELEFIRE is an advanced analog addressable fire detection and extinguishing control panel developed modularly using advanced technologies, allowing operational flexibility and easy installation. The system complies with the curren..

Kentec Syncro AS 2 Loop Apollo Protocol Kitemark- Without Enable KeySwitch,BSI® Licensed

* Two addressable loops up to 126 detectors each.* Access level 2 WITHOUT enable key-switch.* Networkable (requires K555 network card)* 400 milliamp output.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-3A power supply.* Stores 500 last events in the event lo..

Kentec Elite RS 1 Loop Analogue Addressable Fire Control Panel- Hochiki protocol - Red ,UL/FM® Approved

* One full SLC circuit up to 126 detector.* Access level 2 enable key-switch.* Can be networked with additional RS and/ or Elite control panels.* Compatible with eMatrix graphics annunciator.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-5.25A power supply.* ..

Taktis® Vision Addressable Repeater Panel

* Full colour 7” (800 x 480 pixel) GUI (Graphical User Interface)* Replicates information displayed at the FACP.* Automatic display brightness adjustment.* Internal buzzer attenuates.* Connects via control panel network terminals.* Low current, 24V DC powered.* Configurable functionality.* Enable ke..

Taktis UL Vision Network Repeater - surface - Red

* Full color 800 x 480 LCD with resistive touch screen and automatic backlight dimming.* 18 SWG.* 1.2mm mild sheet steel.* IP30 rated.* RS-485 two-wire. * Maximum distance from fire control panel: 3900 feet (1200meters)..

Kentec Syncro AS Lite 1 Loop Apollo Protocol Kitemark ,BSI® Licensed

* Single addressable loop up to 126 detectors.* Access level 2 WITH enable key-switch.* Non-networkable.* 400 milliamp output.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-3A power supply.* Stores 500 last events in the event log.* 1.2mm mild sheet steel Con..

Taktis UL 2 loop card

The Dual Loop Panel Module monitors loop device status and provides status to the panel processor. It holds device configurations and operates in a standalone manner when catastrophic failures occur...

Kentec Syncro AS Lite 1 Loop Apollo Protocol Kitemark- Without Enable KeySwitch ,BSI® Licensed

* Single addressable loop up to 126 detector.* Access level 2 WITHOUT enable key-switch.* Non-networkable.* 400 milliamp output.* 2 programmable sounder circuits.* 5 programmable inputs.* 3 programmable relays.* 24V-3A power supply.* Stores 500 last events in the event log.* 1.2mm mild sheet steel C..

eView Analogue Addressable Repeater Panel - Red

* Up to 15 annunciators can be connected to each Elite or Elite RS fire control panel.* High brightness LED indications.* Internal sounder.* Replicates all panel controls (Elite RS)* Simple two-wire serial connection.* 24V DC powered.* Connection supervised by Elite RS fire control panel.* 1.2mm mil..

Syncro View repeater panel c/w enable keyswitch

* Up to 15 annunciators can be connected to each Syncro, Syncro Response or Syncro AS fire control panel.* Large liquid crystal display (240 x 64 pixels)* High brightness LED indications.* Internal sounder.* Replicates all Syncro panel controls.* Simple, two-wire serial connection.* Small, Syncro st..

Taktis UL 2 loop card

The Dual Loop Panel Module monitors loop device status and provides status to the panel processor. It holds device configurations and operates in a standalone manner when catastrophic failures occur...

Taktis Network card

Partially isolated network providing RS485 communications for general use...

eNET Elite RS Networking Communication Interface Card

* Up to 64 nodes.* High integrity protocol when wired Class A.* Fully secure against short or open circuit faults.* Simple 2-wire loop connection.* Supports open ended networks for retrofit applications.* Network wide test and disablement functions.* Network wide cause and effect logic.* Flexible co..

UV DETECTORS

..

Taktis UL network module (Ethernet and IFAM)

provides enhanced highspeed communication for networking fire control panels. The network provided by this module can support combinations of Taktis® Fire Alarm Control Panels and Taktis® Vision units. Taktis® Fire Alarm Control Panels can receive events from other panels in the network. The Class X..

Syncro Fault Tolerant Network Card

Added to Syncro AS panels when multiple panels are required to be connected together as a network Supports a network of 64 Syncro AS panels in a fully fault-tolerant RS485 network. ..

TSA-200XT

The control panel operates in compliance with Israeli Standard SI 1220, American Standard UL 864 edition 9 and European Standards EN 54-2 and EN 54-4. This fire detection control panel includes two zones, horn output, automatic fire dialer and fault dialer, alarm relay and fault ..

FIRESAFE PAL3004 EXTINGUISHER PANEL 4 ZONES

- Delay of extinguishing signal of up to 75 seconds.- Signal representing the flow of extinguishing agent to indicate the released condition. - Monitoring of the status of components by way of a low pressure switch input.- Emergency hold device to enable the extinguishant delay time to be exten..

CODESEC FIRE ALARM PANEL K4

- 4 Zones.- Zone Name Can Be Written.- Real-Time Clock.- 100 Event Log with Time and Date Stamp.- 2×16 Alphanumeric LCD Display.- Short-circuit and open-circuit Indication.- Plastic Front Case.- Metal Body.- User-friendly Installation and Programming.- Day/Night Mode, 1 Supervised Siren Out.- Alarm ..

Hochiki Hand Held Sensor Address Programmer

* Hand held address programmer designed to address the ESP range of Sensors and all other addressable devices such as wall sounders, mini-modules and manual call points.* Lightweight Design.* Quick And Reliable Addressing.* Over 8000 Address Settings From 1 Battery.* Displays Sensor Analog Value...

CODESEC FIRE ALARM NEW K4A ECONOMY

• 4 Zone.• Separate Alarm, Short circuit, Open circuit, and Bypass Leds for each• zone.• Keylock for Access Level 1.• Plastic Case.• User-friendly installation and programming.• Day/Night Mode.• RS232 Interface.• 1 Supervised Siren Out.3 Open Collector Ou..

ADR-723

ADR-723 Addressable Hige-Power Output ModuleThe ADR-723 is a three-channel input/output control module that contains two output circuits (NAC – Notification Alarm Circuit) and a single input circuit (IDC – Initiating Device Circuit). This module is intended for use wherever there is a need for multi..

TDM-500I AUTO DIALER

Automatic Dialer TDM 500IThe most advanced warning device on the market, offering maximal protection during a fire event - capable of dialing within seconds the security forces or the owner of the building...

Hochiki DUAL RELAY MODULE, 2 AMPS WITH ISOLATOR

* Provides two independently configurable Form C contacts per address.* Contacts are2A @ 30 VDC / 0.5A @ 120 VACC rated.* Up to127 devices can be used on each SLC loop.* Visible Bi-colored LED is software controlled and can be programmed to blink red or green when polled. The LED can be latched on w..

ADR-705

ADR-705 SwitchThe company has a wide variety of Input/Output unitsNet ModulesTLD-08 + TSM-E16TLD-08 + TLD-E16TLD-08 + TLD-R8TLD-08 Input/Output unitsLI-3000E Input/Output unitsLI-3000..

Auto Dailer PRO -Double

..

TFH-280A+Base HEAT ADRESSABLE

TFH-280A25.7.2019TELEFIRE is an addressable detector allowing two modes of operation – fire alarm at a fixed temperature and an alarm set off by the rate of temperature rise. The TFH-280A detector from TELEFIRE is a smart set-point detector with an independent address, allowing coverage of a detecti..

Hochiki Intelligent addressable manual pull station

* Single Action (Pull)* Addressable integrated design.* All metal construction.* Extremely easy to operate.* Bi-colored status LED indicates Standby and Alarm conditions.* Enclosed switch with glass rod (included)* Terminals accept up to 14AWG wire.* Surface mount back box available.* ADA compliant ..

Hochiki DUAL RELAY MODULE 2 AMPS

* Provides two independently configurable Form.* C relay contacts, using one SLC address.* UL 864 9th Edition Listed.* Uses the noise-immune Digital Communication.* Protocol (DCP), which utilizes interrupts for fast.* response to fires.* Up to 127 modules can be placed on a single. * SLC Loop.*..

Hochiki SHORT CIRCUIT ISOLATOR

* Can be placed at any location on SLC loop* Checks the line for short circuit at power up. * If the line is normal, the relay will be returned on. If a line short is detected, the relay remains open* Indication of a single short circuit by a yellow LED..

TFO-480A+Base SMOKE ADRESSABLE

The photoelectric smoke detector manufactured by TELEFIRE is equipped with a unique and sensitive sensor designed to detect smoke from various combustion sources. The TFO-480A from TELEFIRE is a smart detector with an independent address, which allows the fire detection and extinguishing control pan..

Addressable Single Output Module

* Single voltage-free relay output.* Output relay can be powered internally or externally (selectable at installation)* Single input for connection to dry contact inputs Monitors and signals three distinct input states.* Normal; Alarm; Open-circuit.* Separate indicators for Quiescent, Alarm and..

Addressable audio/visual alarm base with built in isolator

* Visual, audible and audio/visual models available.* Audible alarm output adjustable up to 85dB at 1m.* Easy DIP-switch address setting.* built-in isolator with both automatic operation and restore.* Compatible with either addressable or non-addressable detectors.* Optional transparent or white cov..

Manual Call Point

* Pressure activated displacement element.* provides a safe user experience.* Integral indicator to show polling and alarm activation.* Resettable with simple key operation.* Suitable for indoor use.* Monitors for quiescent, alarm and fault conditions.* DIP switch address setting.* 126 usable detect..

Hochiki Photoelectric smoke sensor

* Low profile - only 2.00” high, including base.* Simple and reliable device addressing.* Automatic compensation for sensor contamination.* Built-in fire test feature.* Uses the noise-immune Digital Communication Protocol.* (DCP), which utilizes interrupts for fast response to fires.* Two built-in p..

Hochiki Fixed temp/rate of rise heat sensor

* Low profile - only 2.00” high, including base.* Simple and reliable device addressing.* Automatic compensation for sensor contamination.* Uses the noise-immune Digital Communication Protocol.* (DCP), which utilizes interrupts for fast response to fires.* Two built-in power/alarm LEDs.* Programmabl..

Hochiki Fast Response Contact Module

* UL 864 9th Edition Listed.* Single input contact monitor.* Fast, reliable contact monitoring utilizing the Hochiki DCP (Digital Communications Protocol)* 127 devices can be used per DCP loop.* Can be programmed to monitor Normally Open  (NO) or Normally Closed (NC) contacts.* Operates on Clas..

Addressable Smoke/Heat Detector with remote LED output

* Dual photoelectric smoke and heat sensors to detect either smoke, heat or a combination of the phenomena.* Ideal for both fast-flaming and slow smouldering fires..* Advanced algorithms provide analogue detection discrimination.* High immunity against unwanted alarms.* Sleek low-profile housing des..

Addressable Single input Module

* Single input for connection to dry contact inputs.* Monitors and signals three distinct input states.* Normal; Alarm; Open-circuit.* Separate indicators for Quiescent, Alarm and Fault conditions.* Polling indicator shows quiescent operation.* DIP switch address setting.* 126 usable detector addres..

Addressable Mini, single output module for audio/visual alarm devices

* Ideal for control of audio/visual alarm devices.* Signals normal and short-circuit alarm zone conditions.* Small size.* Capable of supplying 35 mA to power non-addressable devices.* DC 24 V operation.* DIP switch address setting.* 32 usable detector address settings per loop...

Hochiki SENSOR BASE, BONE COLOR WITH ISOLATOR

* UL  Listed.* Ability  to  detect short circuit conditions Designed for use with all DCP analog sensor.* Built-in  LED indication upon short circuit condition.* Contains a security locking tab for tamper protection...

Addressable Heat detector, remote LED output

* Durable heat sensor.* Analogue detection discrimination.* Dual LEDs for 360° visibility.* DC 24 V operation.* 2-wire connection to many popular loop protocols.* DIP switch address setting.* 126 usable detector address settings per loop.* Optional remote LED output...

USB to RS232 Serial Converter

Converts the serial connector of the download lead to a USB A connection for laptops which do not have a serial port...

Loop Isolator

* Automatic operation.* Automatic reset.* DC 24 V operation.* Compatible with 2-wire fire detection and alarm systems.* LED activation indicator...

Addressable photoelectric smoke detector with remote LED output

* Advanced algorithms provide analogue detection discrimination.* Surface-mount device (SMD) circuit board design.* High immunity against unwanted alarms.* Stable smoke sensing chamber. No adjustment or replacement required.* Sleek low-profile housing design.* Dual LEDs for 360° visibility.* Conveni..

Addressable Mini Input Module

* Signals normal, alarm and open-circuit alarm zone conditions.* Small size.* Capable of supplying 13 mA to power non-addressable devices.* DC 24 V operation.* DIP switch address setting.* 126 usable detector address settings per loop...

MAINTENANCE SWITCH

..

GAS RELEASE INDICATOR

..

EXIT SIGNAGE LIGHT

..

TFO-480+Base

The photoelectric smoke detector manufactured by TELEFIRE is equipped with a unique and sensitive sensor designed to detect smoke from various combustion sources...

TFH-283+Base

TELEFIRE is an addressable detector allowing two modes of operation – fire alarm at a fixed temperature and an alarm set off by the rate of temperature rise. The TFH-280A detector from TELEFIRE is a smart set-point detector with an independent address, allowing coverage of a detection radius based o..

TIP-224+Base

Telefire's TIP-224 is an analog addressable device that integrates an indoor horn and an addressable output card, eliminating the need for an output module installed in a separate box, therefore reducing material and labor cost. As an added benefit, the unit contains a high-brightness LED. The TIP-2..

Isolator Base

* Automatic operation/reset.* LED activation indicator.* Surface-mount device (SMD) circuit board design.* Secure mounting to all surfaces.* Flexible mounting pitch.* Low profile.* Plated contacts for durable connection to detectors.* Fitted square washer to easy and reliable cable clamping.* Termin..

NUMENS SIREN

..

SOUNDER FLASH, DC24V

..

NUMENS SMOKE DETECTOR SNC-300-SL

· Advanced algorithms provide analogue detection discrimination.· Surface-mount device (SMD) circuit board design.· High immunity against unwanted alarms.· Stable smoke sensing chamber. No adjustment or replacement required.· 4-wire models for DC 12 V, 24 V and 48 V&nbs..

NUMENS HEAT DETECTOR HNC-310-HL

· Advanced algorithms provide excellent detection discrimination.· Durable sensor. No adjustment or replacement required.· Surface-mount device (SMD) circuit board design for stable and reliable operation.· Dual LEDs for 360° visibility.· 2-wire models for DC 12 V ..

BELL RING

..

START STOP BUTTON

..

Hochiki Pull Station Back Box

* Pull Station Back Box - 1-3/4" Deep.* Weatherproof Manual Pull Station.*  10 A, 120 VAC contacts.* Rugged die-cast aluminum housing.* Neoprene sealing gasket.* Corrosion-resistant construction.* Hex reset.* Latching pull-down lever.* Screw terminal connections...

FIRESAFE SMOKE DETECTOR EN54-7

* This detector can be used in all areas where photoelectric smoke detector is required. It is suited for fires ranging from smoldering to flaming fires.* This detector uses a state of-the-art optical sensing chamber, it is designed to provide open area protection and to be used with most convention..

FIRESAFE HEAT DETECTOR EN54-7

* This detector can be used in all areas where heat detector is required. It is suited for fires ranging from heat to flaming fires.* This detector is designed to provide open area protection and to be used with most conventional fire alarm  panel.* Two LEDs on each detector provide local 36..

BELL RING

..

FIRESAFE MANUAL CALL POINT BG RED

* Pressure activated displacement element provides a safe user experience.* Integral alarm indicator available.* Resettable with simple key operation.* Suitable for indoor use.* Wide operating voltage range.* Compatible with 2-wire and 4-wire fire detection and alarm&nb..

EMERGENCY STOP

..

BATTERY 12v 4.5A 750016

..

3TONES SIREN 24v/12V

..

Remote Indicator

* Easily seen when in the alarm condition.* Wide operating voltage.* Easy installation with no adjustments required...

LIGHT STROBE

..

FIRESAFE INDICTOR IN16L

..

Showing 1 to 100 of 107 (2 Pages)